Custom Search
 "click for bigger photo")
Me and grandaughter at Good Guys Scottsdale AZ.
 "click for bigger photo")
my caddy tail light frenched in rear fenders
 "click for bigger photo")
my 1968 chevy pickup, chopped, Classic Proformance lowering kit. Springs and schocks.
 "click for bigger photo")
laid some black primer.
 "click for bigger photo")
ready to go back together
 "click for bigger photo")
rear end painted ready for install
 "click for bigger photo")
cleaned up rear frame new 4"lowering springs and schocks
 "click for bigger photo")
suicide the doors using the stock hinges..what a job...
 "click for bigger photo")
replacing the rockers and cab cornors..
 "click for bigger photo")
always liked the 59 Caddy tail lights. I had frenched the stock tail lights in the rear fender long ago, so I ordered the light pockets on line, and started laying out and cutting, and filling the stock light cutout.
 "click for bigger photo")
I filled the stock location, fitted the light pockets and wire welded it all together.
 "click for bigger photo")
than I did the other side, shot some primer and ready for light install
 "click for bigger photo")
 "click for bigger photo")
 "click for bigger photo")
 "click for bigger photo")
 "click for bigger photo")
 "click for bigger photo")
Direct link:
Brandon on Aug 13, 2008 said:
Cool!!
[Reply to this comment]